Description
Canon OCE IJM781 Polymeric Permanent Production Vinyl, White Gloss, Grey Glue, 70 Micron
Canon IJM781 is a high quality polymeric PVC film with grey glue, suitable for colour intensive prints for short and mid-term advertisement, both indoor and outdoor. The grey glue allows immediate over-application without shine-through, and the film performs excellently on all major printing systems, including (eco) solvent, UVgel/UV and latex.
Key features and benefits
- Grey glue, no shine-through: The grey glue allows immediate over-application without shine-through.
- High opacity: Opacity above 99%.
- Glossy white finish: Glossy white vinyl with excellent print quality.
- Works across ink types: Suits (eco) solvent, UVgel/UV and latex printing.
- Up to 5 years outdoor durability
- Permanent waterbased glue: Permanent adhesion for signage and graphics.
- Wet application suitable: Can be applied to wet surfaces, with a service temperature of -40°C to +90°C.
- Three roll widths: Available in 1050mm, 1370mm and 1600mm on a 3″ core.
- Light PE-coated release liner: Supplied on a light liner.
Specifications
- Material: Polymeric PVC film, white gloss
- Adhesive: Permanent, waterbased, grey
- Film thickness: 70 micron (ISO 534)
- Liner weight: 140 g/m² (ISO 536)
- Total weight: 230 g/m² (ISO 536)
- Opacity: >99% (ISO 2471)
- Adhesion on steel: 8 N/25mm after 20 minutes; 11 N/25mm after 24 hours (AFERA 5001)
- Widths: 1050mm, 1370mm, 1600mm
- Core: 3″
- Print technologies: (Eco) solvent, UVgel/UV and latex
- Outdoor durability (unprinted): 5 years
- Service temperature: -40°C to +90°C
- Shelf life: 2 years at 15-25°C and 35-65% RH
Best used for
- Indoor and outdoor durable signage
- Vehicle graphics
- Colour intensive prints for short and mid-term advertising
Things to know
- Cold lamination only. Use pressure-sensitive laminates only, and do not use warm or hot lamination. Let prints dry for at least 48 hours before laminating. Lamination improves UV resistance and abrasion protection, and only pressure-sensitive laminates are recommended for outdoor use.
- Printing conditions. Print at 15-25°C and 35-65% RH, and acclimatise the media for 24 hours beforehand. Handle with cotton gloves and keep the film clear of grease, oil, silicone and dirt. Load the media carefully, calibrate and test print first. Use a take-up device, and an external drying unit is recommended for high-speed production.
- Application. Apply to smooth, flat, clean, grease-free surfaces, and not to freshly lacquered surfaces. Apply above 10°C. The film is suitable for wet surfaces, and temporary whitening may appear but disappears once the adhesive is fully dry. Pretest on unknown surfaces.
- Storage. Shelf life is 2 years at 15-25°C and 35-65% RH. Repack opened rolls and store them on hanging fixtures in the box.
- Removal. Start at a corner and peel slowly at 60-90°. A hot-air blower or metal scraper can help, used with caution. Remove residue with a lemon-based cleaner or a solvent (heptane, isopropyl alcohol or acetone).
- No MSDS required. No Material Safety Data Sheet is required for this film.
